How to make modern optoelectronic systems

• How to make modern optoelectronic system

At present JSC "Central Research Institute" Cyclone ", which is part of the holding company" Russian Electronics ", carries out extensive work in the development and production of advanced electro-optical systems and devices. I suggest to get acquainted with the production of products, built according to modern standards.

Cluster system for the production of active-matrix organic electroluminescent microdisplay has no analogues in Russia.

The cluster system is a multi-chamber installation for serial rocker processing substrate under high vacuum, consisting of a number of specialized chambers for automatically moving the substrates in the system, vacuum-thermal deposition of organic and inorganic materials and metals, sealing matrices loading and unloading wafers and masks.

control system operation and quality control are carried out using computer technology. Testing on a system of individual technological operations adjustments ensured by the possibility of operating modes each vacuum chamber separately. Cluster installation structure allows most of the process steps in a single vacuum cycle and to minimize the negative effect of atmospheric oxygen and moisture on the light emitting array. The system provides operation with the substrates up to 200 x 200 mm.

Test section № 1.

The workshops are equipped with modern equipment and devices.

All products undergo strict quality control.

The production requires a certain class of cleanliness and control.

Finished products are subjected to temperature effects of 10 days.

Master test section includes a vibration table.

All products are tested for exposure to vibration.

The next step. Tests for temperature effects.

Sights "Shahin" test for exposure to temperatures ranging from -25 to +50 degrees Celsius

test area Master prepares a sight to shock on impact tests.

Thermal imaging sight must be resistant to such influences.

CNC equipment Land number 1.

Computer numerical control (CNC) - a computerized management system that controls process equipment drives, including machine tool accessories.

assembly portion № 2.

Advisor to the General Director Oleg Yakovlev demonstrates the supplied thermal sight.

The site setup of electronic components and modules.

The most important element is a thermal sight microbolometer arrays. Since 2015 JSC "Central Research Institute" Cyclone "will go to the Russian matrix. This will significantly reduce the cost of the final device.

After passing through numerous ordeals thermal sights and other items, a soldier on the battlefield may not have to worry about the reliability of the equipment